Deatschwerks take a unique approach to building our high flow injectors. Other fuel injection companies offer only a couple different styles of injectors and leave fitting them up to the customer. At Deatschwerks every injector they produce is a drop-in fitment for its application. Their injectors are engineered to fit your OEM harness, OEM fuel rail and OEM manifold (see diagram below).
All Deatschwerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. This means better fitment, easier tuning, and increased reliability. Deatschwerks back all of their products with a comprehensive 12-month warranty.
Most aftermarket injectors go straight from the production line to the shipping department. At Deatschwerks, they have added what they consider a crucial step of flow balancing and quality assurance testing on EVERY set of injectors they produce - not just one or two from each lot. Over 40 data points are collected and analyzed on each injector to be sure customers only receive the best end product. All testing is performed in-house on a custom built New Age Technologies injector flow bench.
Below is a brief outline of some of the testing:
- 6-point coil test
- Leak testing from 0-100psi
- RPM Ramp 500-10,000 rpm
- Pulse Width Ramp 0.5-17ms
- Spray pattern analysis (open and pulsed)
Detailed High Performance Flow Report
Every set of Deatschwerks injectors is accompanied by a full color injector report This comprehensive report contains information on your specific injectors that is critical to the high performance tuner such as...
- Fuel pressure flow rate conversions
- cc/min and lbs/hr conversions
- BSFC based horsepower maximims
- System balance and flow variance
Deatschwerks injectors are DIRECT FACTORY REPLACEMENTS for their listed applications. In addition, Deatschwerks offer a comprehensive line of universal injectors which are available for customers who's applications are not listed in our catalog. Their Universal applications include high impedance, low impedance, narrow body, wide body, and several different connector options. Please do not hesitate to call us if you need assistance in choosing the best universal injector for your application.
Deatschwerks High Flow Fuel Pump
To complement their range of high performance, drop-in fitment fuel injectors, fuel system specialists, Deatschwerks, have developed the highest flowing in-tank fuel pump yet. With a flow rate of 300 litres per hour, the DW300 pump comes with an application specific or universal fitting kit and a 3-year warranty. The pump is 100% compatible with E85 ethanol fuel.
Deatschwerks also have developed two new high flow in-tank fuel pump ranges, the DW200 series; with a lower flow rate (around 255LPH) and price compared to the DW300 and the DW65c series; a compact pump with a flow rate of around 265LPH and a more compact design.
You can read more about the Deatschwerks DW300 high flow fuel pump here, along with performance graphs and technical information.
The link below will take you away from CoordSport.com